Inox MX8 Spray Grease

Inox MX8 Spray Grease

Inox MX8 PFTE Extreme Pressure Grease (SPRAY) - High resistance to: Water, Salt, Chemicals and Drying.

300gm Spray Can

This is the ultimate grease application for fishing reels, as if the fishing reel has a drain hole, the the supplied thin plastic applicator tube will fit into most drain holes, and you simply spray the grease into your reels and give the gears a good coating of grease.

A PREMIUM INDUSTRIAL GRADE - EXTREME PRESSURE - HIGH TEMPERATURE - LITHIUM COMPLEX AND P.T.F.E. BASE GREASE

SPECIFICATIONS

The extreme pressure and anti-wear properties of INOX-mx8 grease gives long service life under high loading and shock loading conditions from very low to very high temperature environments. These special characters of shear stability, combined with the inclusion of effective rust, oxidation and corrosion inhibitors and tackiness adhesives, ensures this grease to be the preferred recommendation for sealed for life anti-friction bearings.

INOX-mx8 has the ability to prevent scuffing and reduce wear under high load and shock load conditions, together with its excellent high shear stability and high temperature operation, makes INOX-mx8 the preferred choice over other extreme pressure greases.

INOX-mx8 resists 'SQUEEZE OUT' from surfaces requiring lubrication under load conditions.

INOX-mx8 has excellent resistance to water and water wash out even at elevated temperatures. Effective lubrication is maintained and in these situations it also gives protection against rusting and corrosion.

INOX-mx8 will not thin out because it is shear resistant or thicken because it is resists oxidation.

P.T.F.E. - Polytetrafluoroethylene is a premium grade anti-friction medium which gives increased lubrication and reduces operating temperatures to bearings, bushes, shafts, gears, chains, splines, PTO's, turntables, cables, universals, CV and ball joints

• TECHNICAL DATA
• TYPICAL TESTS ASTM METHOD
• NLGI: 2
• Soap Type: Lithium Complex
• Colour: Red
• Texture: Smooth & Tacky
• Penetration at 25°C
• Worked, 60 Strokes D.217 280 min. - 305 max
• Dropping Point, °C: D.2265 260+
• Lower Operating Temperature °C :- 20
• Leakage, Wheel Bearing 65g
• Packed, 163°C, g D.1263 1.5
• Water Washout at 80°C, %: D.1264 3.5
• Oil Separation: 24 hours at 25°C kPa D.1742 2
• Oxidation Stability -
• Pressure Drop at 100 Hour, kPa D.3336 15
• at 500 Hour, kPa D.3336 70
• Lubrication Life, Bearing No. 204
• 10000 rpm, 163°C, Hours D.3336 125
• Rust Prevention Rating D.1743 Pass
• Timken, OK Load, Kg D.2509 26
• 4-Ball Weld, Kgf IP.239 575
• 4-Ball Wear Scar, mm D.2266 0.48
• Base Oil, cSt at 40°C D.445 190
• at 100°C D.445 18.0

APPLICATIONS & USES


AUTOMOTIVE: Wheel bearings - Ball joints - CV & universal joints - Tie rod ends - All control and gear change cables - All metal bushes and linkages - 4 WD winches - Trailer ball couplings.

AVIATION: Aircraft wheel bearings - All control cables and linkages - All bearings, bushes, control cables and linkages for on ground support equipment and machinery.

BEARINGS: All sealed for life bearings - Open bearings and bushes - Worm and screw drives.

COMMERCIAL: All mower bearings, bushes and control cables - All wheel bearings, bushes, hoist chains, sprockets and control cables on Forklifts, Front End loaders and Pallet Trolley Jacks - Saw and log feed bed bearings in Saw Mills - Air conditioner bearings and bushes.

EARTHMOVING: All wheel bearings - Track sprockets and pins - PTO splines and couplings - Control cables. linkages, tie rod ends, chains and winches on Bobcats, Backhoes, Trenchers, Post Hole Diggers, Bull Dozers and Scrapers.

ELECTRICAL: All electrical motor, generator, alternator bearings and bushes,
Solenoid shafts.

FARMING: All wheel bearings - PTO couplings and Splines - Chain drives and sprockets - Winches and cables - Wind mill bushes and shafts - Overhead and elbow gears in shearing sheds - Pump motors - Pins, linkage points, ball joints, universal joints, control cables on Tractors, Harvesters, All Farm Machinery and Equipment.

FISHING: All fishing reel bearings and bushes - Cable drum bearings, cables, gears and tackle blocks on Fishing Boats and Trawlers - Anchor winches and cables.

INDUSTRIAL: Fan motor bearings in cold rooms and freezers - Conveyor belt bearings All machinery.

MARINE: Boat trailer wheel bearings - Trailer ball couplings - Deck and anchor winches Steering control cables - All electric motor bearings, bendex assemblies and solenoid shafts - Stuffing box bushes.

MINING: All bearings, chain drives, PTO splines and couplings, ball joints, universal joints, control cables, tie rod ends, turntables, pins, bushes and hinges used below and above ground - All electric motors and solenoid shafts, pumps, draglines, dump trucks, grading and sorting machinery, conveyors and all other mining machinery and equipment.

SHIPPING, WHARVES & SLIPS: Hinge pins on container doors - All bearings, bushes, pins, linkages, ball, universal & CV joints, control cables, chains used in winches, hoists, loading equipment, cranes, forklifts, container handlers and wharf machinery bearings, bushes and cables used in winches and boat cradle wheels & amp; tracks on slips.

TRANSPORT: Wheel bearings - Ball joints - King pins - Universal joints - Turn tables Spring shackles - Air brake slack adjusters - Trailer couplings - Tie rod ends - Idler arm bushes - Control cables and linkages - All electric motor and air starter motor bearings.

INOX® QUALITY PRODUCTS
"There is no substitute for Quality"

MANUFACTURED IN AUSTRALIA

KEYWORDS:
Inox MX8 Spray Grease,  inox, lubricant, oil, reel oil, tackle guard, tackle lube, spray oil, spray grease, grease,